Digital-audio-labs Livemix CS-DUO Personal Mixer User Guide Manual de usuario descargar pdf (Pagina 41)

LIVEMIX CS-DUO

LIVEMIX FIRMWARE INSTRUCTIONS

Firmware updates add features and ensure compatibility with all parts of the Livemix system.

Checking the rmware version of your Livemix system is detailed in the “Livemix Version Info”

section of this manual. To nd out if your Livemix system has the most current version, check the

latest version at http://www.digitalaudio.com/support and compare it to the rmware reported by

the CS-DUO Livemix Version Info screen.

PREPARING A USB FLASH DRIVE

To update the CS-DUO, you will need a USB ash drive that has been FAT formated. Other le

systems will not work.

CS-DUO UPDATE INSTRUCTIONS

TO UPDATE THE FIRMWARE OF THE CS-DUO:

1. Download the latest rmware from http://www.digitalaudio.com/support.

2. Unzip the rmware zip le and copy the LMUPDATE folder to the root directory of a USB ash

drive. Please make sure the LMUPDATE folder is not in another folder.

3. Insert the FAT formatted USB ash drive into the USB port on the back of the CS-DUO. The

CS-DUO will automatically start the rmware update process and present you with a pop up

display.

4. Press YES to begin the update. If you do not want to update the rmware, press NO. Once the

rmware update has started, make sure you do not turn off the power to the CS-DUO or MIX-

16/32 as it may damage the CS-DUO.

5. When prompted, remove the USB ash drive from the CS-DUO.

6. The CS-DUO will now update. When the update is complete, the CS-DUO will reboot.

You will need to perform this update on each CS-DUO in the system for maximum compatibility and

consistency.

CS-DUO FIRMWARE UPDATE TROUBLESHOOTING

If the rmware update process doesn’t start after following the steps above, you can enter rmware

update mode by doing the following:

• Unplug the network cable to turn the CS-DUO off.

• Insert the USB drive with the rmware le downloaded per the instructions in steps 1 and 2

above.

• PRESS and HOLD the A and B buttons on CS-DUO. Continue to HOLD the A and B buttons and

reconnect the network cable to power the CS-DUO on.

• Follow rmware update instructions on the screen.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 50 51

Sin comentarios

Digital-audio-labs Livemix CS-DUO Personal Mixer User Guide Manual de usuario Pagina 41